Download Asset Driver

 



Our global team of engineers and sales support staff can answer your toughest questions. We have offices located around the globe, so we understand challenges specific to your region and location. If you can't find the software downloads and drivers that you need here, please reach out to us for immediate assistance. We are glad to help. This is a standalone installer for the Stinger S driver 3.7.9.0. The driver is required for the 7.1 surround sound feature to work correctly in NGENUITY software.

The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.


Windows

(Manufacturer’s Chinese Info Link)

  1. Download the Windows CH340 Driver
  2. Unzip the file
  3. Run the installer which you unzipped
  4. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Older Windows Driver Version and Instructions

  1. Download the Windows CH340 Driver
  2. Unzip the folder.
  3. If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
  4. If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
  5. If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.
  6. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Macintosh

(Manufacturer’s Chinese Info Link)

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them.

Previous macinstosh downloads if the above doesn’t work for you…

(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)

Download Asset Driver

Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.

OSX Sierra (10.12) Note

A kindly user, Maarten Segers reports

FYI, the driver documented here WILL crash on OSX Sierra.

Make sure to use this one instead: https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver

I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.

See uninstalling information at the bottom of the page if the driver causes problems for you.

Here is an older version of the Mac driver, NOT FOR 10.12 Sierra

(V1.0) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11)

Download Asset Driver

Linux

(Manufacturer’s Chinese Info Link)

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Download Asset Driver Windows 10

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.

Download Asset Drivers

Firstly regards the crash make sure you installed the 1.3 version of the driver, not the old one. You could download it directly from the Manufacturers Website in case they have issued an update since I wrote this page.

Secondly a quick google search reveals that this is how you uninstall:

Download Asset Driver Software

  1. Open a terminal and type: cd /Library/Extensions/
  2. Verify that the .kext file is present: ls | grep usbserial.kext
  3. Output should be: usbserial.kext
  4. Then type: sudo rm -R usbserial.kext
  5. Verify that the .kext file has been removed: ls | grep usbserial.kext
  6. Output should be empty.
  7. After you should remove the files stored in receipts folder: cd /private/var/db/receipts/
  8. Find the enties: ls | grep usbserial*
  9. Output should be: codebender.cc.ch34xinstaller.usbserial.pkg.bom codebender.cc.ch34xinstaller.usbserial.pkg.plist
  10. Remove each one of the files of the above list: sudo rm -r filename`

Download GRAGA AssetManager Pro


Downloading AssetManager Pro:

If you are upgrading to GRAGA AssetManager Pro from MYOB AssetManager v1/v2, MYOB AssetManager Pro v3 to v8 or are a New User - please download AssetManager Pro by clicking on the link below to download the installer for AssetManager Pro 2021 v9 Business, Premier, Enterprise and Advisor Editions

Download Instructions:

  1. Click save SAVE to copy the setup.exe file to your computer.
  2. When the download has completed, double-click the setup.exe to install the program.
  3. Follow the on screen instructions

For any assistance please submit a request via our Help Centre, or email support@assetmanagerpro.com.au

All GRAGA software is supplied subject to licence conditions contained in the products. By proceeding you are acknowledging and accepting the terms of the Privacy Statement and Software Terms and Conditions.

Download Asset Driver Download

Upgrade Instructions:

  1. If you are upgrading an MYOB AssetManager v1 or MYOB AssetManager v2 file - please contact our migration team on +61 3 9016 9454 for more information.
  2. If you are upgrading from MYOB AssetManager Pro v3 or later - firstly make sure you have a backup, and then simply open your v3 to v9 company file in AssetManager Pro v9 which will upgrade the file for you automatically.